Stainless Steel GRD316 Camlocks
Type A
Male Camlock with Female BSP Thread
Sizes: 1/2″ to 6″
Type B
Female Camlock with Male BSP Thread
Sizes: 1/2″ to 6″
Type C
Female Camlock with Hosetail
Sizes: 1/2″ to 6″
Type C
3 ARM Female Camlock with Hosetail
Sizes: 3″ & 4″ only
Type D
Female Camlock with Female BSP Thread
Sizes: 1/2″ to 6″
Type D
3 ARM Female Camlock with Female BSP Thread
Sizes: 3″ & 4″ only
Type E
Male Camlock with Hosetail
Sizes: 1/2″ to 6″
Type F
Male Camlock with Male BSP Thread
Sizes: 1/2″ to 6″
Type DC
Female End Cap
Sizes: 1/2″ to 6″
Type DC LB
Female End Cap with LOCKABLE ARMS
Sizes: 2″ to 4″
Type DP
Male End Plug
Sizes: 1/2″ to 6″
Flanged Camlock Female Couplers
Available in Table D, PN16 and ASA150 raised face flanges
Sizes: 1″ to 6″
Flanged Camlock Male Adaptors
Available in Table D, PN16 and ASA150 raised face flanges
Sizes: 1″ to 6″
3″ TTMA Flanged Adaptor for fuel off loading assemblies.
Weldon Camlock Type F Buttweld specially manufactured for welding. Welding end butt weld to schedule 40 pipe size
Size: 1″ to 4″
Weldon Camlock Type A Socketweld specially manufactured for welding. Welding end butt weld to schedule 40 pipe
Size: 1″ to 4″
Weldon Camlock Type B Buttweld specially manufactured for welding. Welding end butt weld to schedule 40 pipe size
Size: 1″ to 4″
Weldon Camlock Type D Socketweld specially manufactured for welding. Welding end butt weld to schedule 40 pipe size
Size: 1″ to 4″
Male to Male Camlocks (Same size both ends)
Size 1″ to 6″
Jump Size Male to Male Camlocks
Sizes: 11/2″ to 2″, 2″ to 3″ and 3″ to 4″
Female Coupler to Male Adaptor
Sizes: 11/2″ to 1″, 3″ to 11/2″, 3″ to 2″, 4″ to 2″ and 4″ to 3″
CAMLOCK SPARE GASKET PROPERTIES
NBR (BUNA N)
Standard in our metal cam & groove couplings. Nitrile is a synthetic rubber offering improved chemical resistance and temperature capabilities to neoprene. The material offers good resistance to oil based hydraulic fluid fats, animal and vegetable oils, flame retardant, liquids, grease, water and air. It offers poor resistance to ozone, ketones, esters and sunlight weather.
EPDM
Standard in our polypropylene cam &groove couplings. EPDM offers good resistance to ozone, heat, steam, strong acid, alkalis and alcohol. It is not suitable for use in oils, greases, solvents and aromatic hydrocarbons.
VITON
Viton offers excellent resistance to mineral oils, greases, alifatic, aromatic, and also special chlorinated hydrocarbons, petrol, diesel fuels, silicon oils and many corrosive industrial applications. The materials offer excellent resistance to temperature, weathering and gas permeability. It is not suitable for use against amines, esters, ketones, steam or low temperature service.
NEOPRENE
Neoprene offers excellent oil resistance, low permeability to gases and resistance to ozone, weathering and corrosion. The material is suitable for moderate acids, alkali’s, salt solutions, petroleum and commercial oils and fuels. It is considered unsuitable for use with strong acids, fats, greases, and most hydrocarbons.
SILICONE
The silicone range of rubbers offers excellent high and low temperature properties, far superior to any other grade. Steam, oils resistant.
TEFLON (PTFE)
Resistant to nearly all chemicals, PTFE have good temperature capabilities. It has very limited flow capabilities which makes the use of a rubber filler essential. The choice of filler will be dictated by the application medium or temperature.
NBR seal (BUNA N)
Color : Black
Sizes : ½” to 8″
EPDM seal
Color : Black with white dot
Sizes : ½” to 6″
VITON seal
Color : Black with red dot
Sizes : ½” to 6″
SILICONE seal
Color : Orange
Sizes : ½” to 6″
NEOPRENE seal
Color : Black with green dot
Sizes : ½” to 6″
TEFLON (PTFE) seal
Color : White
Sizes : ½” to 6″
TEFLON / NBR open envelope seal
PTFE envelope / NBR core
Color : White outside / black inside
Sizes : ½” to 6″