Instantaneous Fire Hose Couplings

Instantaneous Fire Hose Couplings are commonly used by the Fire department for the delivery of water to fire fighting systems but are sometimes used as an industrial hose coupling. Instantaneous Fire Hose Couplings have a 2 ½” nominal bore head (either male or a female) and terminates in a variety of sizes of BSP female thread, BSP male thread and hose tails.

Instantaneous Fire Hose Couplings are available in light alloy and also Brass for corrosive environments such as marine or offshore use. The female incorporates 2 spring loaded catches – a simple pull on both sides of the arms to release the adaptor. When connected, Fire Hose Couplings must be used for pressurised systems for the coupling to produce a leak free joint. The maximum working pressure for an instantaneous coupling is 15Bar.

Bronze Hosetail Set

Product Code    Size    Size
MCB065/SET2 1/2″ x 2 1/2″65mm x 65mm

Bronze Female With Male Thread


Product Code    Size       Size  
MCBFXM0652 1/2″ x 2 1/2″65mm x 65mm

Female with Female Thread

Product Code     Size         Size    
MCF0652 1/2″ x 2 1/2″65mm x 65mm


Bronze Male with Female Thread

Product Code     Size        Size    
MCMB0652 1/2″ x 2 1/2″65mm x 65mm


Aluminium Hosetail Set

Product Code    Size        Size   
MCA065X040/SET2 1/2″ x 1 1/2″65mm x 40mm
MCA065X045/SET2 1/2″ x 1 3/4″65mm x 45mm
MCA065X050/SET2 1/2″ x 2″65mm x 50mm
MCA065X065/SET2 1/2″ x 2 1/2″65mm x 65mm
Close Menu